Image for tote and shirt and iron-on transfer is 6". Image on the tumbler is 4.5"
When ordering a t-shirt please indicate the size in the order notes or email leslie@thepracticeshoppe.com.
Iron-on transfer instructions:
Instructions for HEAT PRESS
- Set your heat press to 300°F and pressure should be 70 psi and over
- Pre-press your garment for 10 seconds.
- Place transfer in position on garment and cover with parchment paper or a Teflon sheet
- Heat press for 15 seconds
- Allow transfer to cool for a 1-2 minutes Cold peel
- After it gets cold, peel the backing away from one corner to ensure transfers has stuck. If so peel remaining of slowly. İf the transfer has not stuck, repress for 15 seconds
- Once you have peeled away the transfer heat press for another 10 seconds for making it print more onto fabric
Instructions for IRON
- Set your iron to the highest cotton setting (no steam).
- Quickly iron the area where the transfer will go to remove wrinkles and moisture.
- Place transfer in position on garment and cover with parchment paper or a Teflon sheet.
- Press firmly with the iron, moving slowly over the entire design for about 15 seconds.
- Let it cool completely.
- Slowly peel off the backing paper.
- Cover with parchment paper or Teflon sheet again and iron for about 15 seconds.